Looking to replace wire rigging for the first time since 1984. I'm over-due by a lot. Is the Salty Dog rigging deal at $268 good, or should I be looking elsewhere?
302/304 Stainless Steel (Wire)
304 Stainless Steel (Thimbles)
316 Stainless Steel (Eye & Fork Ends)
http://www.saltydogmarine.com/product_info.php?products_id=4291
Edited by tominpa on Oct 15, 2016 - 08:49 PM.
--
Tom
NACRA 5.7 (1984 Sail 181)
Pennsylvania
--
NACRA 5.7 Rigging
-
- Rank: Mate
- Registered: Jul 29, 2015
- Last visit: Apr 24, 2024
- Posts: 578
Posted: Oct 15, 2016 - 08:48 PM
-
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Posted: Oct 15, 2016 - 09:45 PM
Where are you?
Salt water boat? Go to a local rigger who will make it up custom (that way you are sure of the steel quality).
Fresh water boat? That is the cheapest you will find it, I trust Murray's a little better but I haven't heard any issues with salty.
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
-- -
- Rank: Mate
- Registered: Jul 29, 2015
- Last visit: Apr 24, 2024
- Posts: 578
Posted: Oct 15, 2016 - 10:53 PM
I checked Murray and was having trouble even assembling the parts. This is way easy with everything in a single package. Not much comes that easy with these 30+ year old boats.
Fresh water boat.
Edited by tominpa on Oct 15, 2016 - 10:54 PM.
--
Tom
NACRA 5.7 (1984 Sail 181)
Pennsylvania
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Apr 30, 2024
- Posts: 1446
Posted: Oct 16, 2016 - 01:02 AM
Ordered a set of standing rigging from Salty Dog.
The owner answered the phone and took my order.
I was a pain in the butt customer with custom stuff and parts shipped to different states.
This was three years ago, and the rigging is well made, and of good materials.
I have raced with it in the Pacific, off Ventura CA.
Full recommendation, and do call him to set your expectations.
Bob
Edited by klozhald on Oct 16, 2016 - 02:51 AM.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Jul 29, 2015
- Last visit: Apr 24, 2024
- Posts: 578
Posted: Oct 16, 2016 - 10:16 AM
Thanks for the personal feedback. I have wire halyard from them, but had not ever gotten any heavier wire. After joining here, I realized I may be on borrowed time with my 32 year old standing rig, and I'd rather not experience a failure with consequential damages or injury.
--
Tom
NACRA 5.7 (1984 Sail 181)
Pennsylvania
-- -
- Rank: Mate
- Registered: Jun 22, 2015
- Last visit: Jul 06, 2018
- Posts: 258
Posted: Oct 16, 2016 - 07:17 PM
I haven't sailed my boat yet with the complete set of standing rigging I just got from Murray's, but I have checked all the dimensions and it is all correct. Their standard wire is black vinyl covered and the fittings are all well done and cleanly finished. Because my boat is one of the very earliest 5.2's I worked directly with Stan Cowell who is very knowledgeable and quick to respond. Here is his direct email; stan@murrays.com these guys at Murray's have been very helpful with my project on multiple items. The complete rig, with everything including bridles, diamond wires and shrouds and wire halyards was about $700.
dg
Edited by dmgbear55 on Oct 16, 2016 - 11:42 PM.
--
dg
NACRA 5.2 #400
This End Up
Original owner since 1975
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.