Falcon F-16 Extrusion :: Catamaran Sailboats at TheBeachcats.com

Falcon F-16 Extrusion

remedy

Rank: Lubber

Registered: Aug 16, 2021

Last visit: Jul 08, 2025

Posts: 17
Posted: Jul 08, 2025 - 10:43 PM

Hi folks,

I recently purchased a Falcon F-16, and the mast had a bend in it so I tried to use Joe Bennett's method for straightening it but it buckled.

Does anyone know which other boat uses the same aluminum mast extrusion or better yet, does anyone have or know someone that might have a Falcon F-16 mast to sell? I've left a VM for Matt McDonald and sent an email to Falcon but thought I'd ask around here as well.

The cross section of the mask measures roughly 2.5 x 6 inches.

Also, if you have any recommendations for what else I can do, I would greatly appreciate it.

Thanks
lakewateree

Rank: Mate

Registered: Oct 31, 2010

Last visit: Jul 10, 2025

Posts: 196
Posted: Jul 10, 2025 - 08:46 PM

Could be wrong but it seems I remember they used a Goodall (used the be AHPC) Viper F16 mast extrusion. Again, could be wrong.

--
Mac
Midlands South Carolina
AHPC Viper USA 366
A Cat USA 366
Super Cat 17
--