Falcon F-16 Extrusion

remedy

Lubber
  • Rank: Lubber
  • Registered: Aug 16, 2021
  • Last visit: Jul 08, 2025
  • Posts: 17
Link to this post Posted: Jul 08, 2025 - 10:43 PM
Hi folks,

I recently purchased a Falcon F-16, and the mast had a bend in it so I tried to use Joe Bennett's method for straightening it but it buckled. icon_frown

Does anyone know which other boat uses the same aluminum mast extrusion or better yet, does anyone have or know someone that might have a Falcon F-16 mast to sell? I've left a VM for Matt McDonald and sent an email to Falcon but thought I'd ask around here as well.

The cross section of the mask measures roughly 2.5 x 6 inches.

Also, if you have any recommendations for what else I can do, I would greatly appreciate it.

Thanks prost
lakewateree
lakewateree
Mate
  • Rank: Mate
  • Registered: Oct 31, 2010
  • Last visit: Jul 10, 2025
  • Posts: 196
Link to this post Posted: Jul 10, 2025 - 08:46 PM
Could be wrong but it seems I remember they used a Goodall (used the be AHPC) Viper F16 mast extrusion. Again, could be wrong.

--
Mac
Midlands South Carolina
AHPC Viper USA 366
A Cat USA 366
Super Cat 17
--