Welcome anonymous guest

Please Support
TheBeachcats.com

18ft Catamaran mast with Halyard Hook  Bottom

  • raycampion

    Lubber
    • Rank: Lubber
    • Registered: Jan 21, 2013
    • Last visit: Jan 21, 2013
    • Posts: 1
    Link to this post Posted: Jan 21, 2013 - 02:41 AM
    Hi, I've recently bought an old Hurricane 500 catamaran, which is about 18ft long. Since purchase, I've noticed that the mast has a main halyard hook, which I'm struggling with. Does anyone know if there is a special type of fitting I'm supposed to use to attach the halyard to the main so that it doesn't permanently catch. Currently, I'm using a standard bowline knot, and have to take the mast down with the main sail still up in order to release it. Any help on this matter would be much appreciated.

    Thanks

    Ray
  • HULLFLYER

    Mate
    • Rank: Mate
    • Registered: Aug 06, 2004
    • Last visit: Feb 24, 2024
    • Posts: 877
    Link to this post Posted: Jan 21, 2013 - 05:22 AM
    Normally a SS ring and shackle, some are 2 pieces and some are connected together.
  • the-renovator
    the-renovator
    Mate
    • Rank: Mate
    • Registered: Sep 29, 2012
    • Last visit: Jan 10, 2018
    • Posts: 441
    Link to this post Posted: Jan 21, 2013 - 08:42 AM
    The Prindle has a "hook & ring setup", you will find the Prindle manual in Photo Albums under Technical Tips, page 2.

    http://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=75717&g2_serialNumber=1

    gives you the technique used to engage the ring onto the hook, click on pic above to enlarge.
  • catmodding
    catmodding
    Mate
    • Rank: Mate
    • Registered: Aug 11, 2010
    • Last visit: Mar 19, 2018
    • Posts: 424
    Link to this post Posted: Jan 21, 2013 - 04:45 PM
    What you need is this part,
    http://www.murrays.com/mm5/graphics/00000001/07-3064-2011.jpg

    Attach the shackle to your main, and the halyard to the small eye,
    Raise the main and when it is fully hoisted, keep tension on the
    halyard while trying to slam the mast-hook in the ring by turning your mast.
    Lowering the main is vice versa, tension on the halyard and try to
    unhook the mast-hook by turning your mast.
    The photo came from Murrays.
    http://www.murrays.com/mm…de=C-MO-CO&Store_Code=MS

    Regards, André

    --
    Tornado (80's Reg White)
    Prindle 18-2 (sold)
    Dart 16 (hired and hooked)
    13 mtr steel cutter (sold)
    Etap 22, unsinkable sailing pocket cruiser.

    Amsterdam, the Netherlands
    --
  • nacra55
    nacra55
    Mate
    • Rank: Mate
    • Registered: Nov 02, 2004
    • Last visit: Aug 07, 2023
    • Posts: 626
    Link to this post Posted: Jan 21, 2013 - 09:36 PM
    Murray's is probably out of the question, the OP is probably not in the USA.

    The hurricanes are UK boats. Ray, what country are you in?

    --
    Ron
    Nacra F18
    Reservoir Sailing Assn.
    Brandon, Mississippi
    --
  • catmodding
    catmodding
    Mate
    • Rank: Mate
    • Registered: Aug 11, 2010
    • Last visit: Mar 19, 2018
    • Posts: 424
    Link to this post Posted: Jan 22, 2013 - 04:24 PM
    @Ron
    A picture tells so much more, at least Ray now knows
    what part to look for.

    André

    --
    Tornado (80's Reg White)
    Prindle 18-2 (sold)
    Dart 16 (hired and hooked)
    13 mtr steel cutter (sold)
    Etap 22, unsinkable sailing pocket cruiser.

    Amsterdam, the Netherlands
    --

No HTML tags allowed (except inside [code][/code] tags)

  • Options

Users on-line

  • 0 users

This list is based on users active over the last 60 minutes.

Search The Beachcats