I broke the top two battens on my P16 yesterday, stupidly, and had some repair questions. My boat came with some older, worn out battens from the bottom of the sail. Could I just cut those battens down to repair the top two? I noticed that they are tapered towards the luff.
--
Alex
Prindle 16 "Shake & Bake"
Portland, Oregon
--
Sail Batten Repair
-
- Rank: Lubber
- Registered: Jun 12, 2011
- Last visit: Oct 23, 2011
- Posts: 47
Posted: Jul 27, 2011 - 12:17 PM
-
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Apr 06, 2024
- Posts: 7088
Posted: Jul 27, 2011 - 12:24 PM
yes -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Apr 10, 2024
- Posts: 2524
Posted: Jul 27, 2011 - 07:27 PM
Cut from the outside end, not the luff.
Can battens(foam core) that have delaminated 6"(luff end) be fixed? Can you wipe the inside surfaces with cleaner, apply resin, clamp & have a useable batten?
I have 3 in that condition, will never race, just need a few spares. Or is it a waste of time?
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
--
Users on-line
This list is based on users active over the last 60 minutes.