Folks,
I am trying to figure out the correct size for the toggle pin that goes into outhaul car on p16. Prindle parts catalog is very cryptic on the subject 9412 Clevis Pin - Outhaul (3/16” X 1/2”). I always been using Ronstan pins if spec calls for toggle pin, bot non of them seems to meet the size http://www.ronstan.us/marine5/range.asp?RnID=248.
Cheers,
Simon
P16 outhaul toggle pin
-
- Rank: Lubber
- Registered: Jul 22, 2011
- Last visit: Jul 25, 2011
- Posts: 5
Posted: Jul 25, 2011 - 11:49 AM
-
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Apr 01, 2024
- Posts: 3428
Posted: Jul 25, 2011 - 05:30 PM
I always get a kick out of this. So I read this post and decide to do a Google search for 3/16 inch toggle pins, and there in the first five results is this very thread here on TheBeachcats.com. Awesome, but not very helpful to the current question.
Search Google for 3/16 inch toggle pins.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Jul 25, 2011 - 07:23 PM
It's normally a 1/4" pin, but I use a fast pin. Pete -
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
Posted: Jul 26, 2011 - 02:30 PM
Same here, In fact mine probably came from Pete. :)
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
--
Users on-line
This list is based on users active over the last 60 minutes.