Nacra Tramp Qusetion
-
- Rank: Lubber
- Registered: Apr 15, 2007
- Last visit: Oct 12, 2018
- Posts: 87
Posted: Nov 28, 2010 - 11:42 PM
Just bought my first Nacra and have a few things to be done to it,The Tramp needs to be replaced and on the starboard hull the tramp track towards the stern the rivets are pulling out.So can i just drill the old rivets and replace with new or do i need to put a deck hatch in.Is there a backing plate for the tramp track or washers etc etc. Any help would be appreciated i dont know if all Nacra's are like this or not i have an 84' 5.0 Thanks in advance. -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Apr 10, 2024
- Posts: 2524
Posted: Nov 29, 2010 - 11:09 AM
Do some searching of the forums. someone fairly recently had the same issue with pulled rivets that you have. I can't remember the exact fix, but it was rather simple.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Lubber
- Registered: Apr 15, 2007
- Last visit: Oct 12, 2018
- Posts: 87
Posted: Nov 30, 2010 - 02:24 AM
Found it,Thanks!
