Prindle 16 mast rotation
-
- Rank: Lubber
- Registered: Mar 08, 2010
- Last visit: Jul 09, 2011
- Posts: 15
Posted: May 05, 2010 - 08:51 PM
Thanks for the question guy's..cause I was going to ask..whether or not you un-pin the mast step hinge before yousail away..I noticed.. when I bought this prindle which I'm restoring to sailing shape that the hinge seemed tweeked so I got a replacement..I'm thinking the guy I got it from never unpinned it so I guess the mast couldn't rotate??The manuaL doesn't really cover this..but am I right that once stepped..and your ready to go..make sure your unpin the mast step hinge?Glenn... -
- Rank: Chief
- Registered: Jul 16, 2009
- Last visit: Oct 28, 2014
- Posts: 1271
Posted: May 05, 2010 - 09:08 PM
correct sir..
--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
-- -
- Rank: Lubber
- Registered: Jul 17, 2005
- Last visit: Jan 20, 2012
- Posts: 20
Posted: May 06, 2010 - 09:27 AM
Glenn, We unpin as soon as the mast is up. And then connect the forestay to the bridle. That way the mast rotates that extra little bit and you get a tighter connection on the forestay. But that is if the 16 uses the same mast set stepping system as the 18.
