Nacra Rudder System, Pivmatics and Bungee Setup

Go to page [-1] 1 - 2 - 3:

timinaustin

Rank: Lubber

Registered: Apr 24, 2014

Last visit: Apr 09, 2017

Posts: 98
Posted: Jan 18, 2016 - 01:10 AM

I just replaced the bungees on my 5.7. One departure that I noted on my boat, not my idea but I stayed with it, was to use a 1" hose clamp instead of the hog rings on the upper ends of the bungees. It still allows you to tuck the clamp/bungees into the rudder arm, and will allow some easy adjustment to compensate for stretching down the road.

--
Tim
81 Hobie 16
87 Nacra 5.7
Austin, TX
--
RicardOben

Rank: Mate

Registered: Jan 24, 2012

Last visit: Feb 26, 2016

Posts: 173
Posted: Feb 04, 2016 - 11:18 AM

I have been away from the site for a while but I pitched the bungee/rope BS and put on a set of Inter Rudders on my 5.5 and it is the single best mod I have made to the boat. JMHO. Got most of the stuff used and had to buy one arm and one casting all in about $700 if I remember correctly. Worth it in my opinion. RIchard.

--
Lake Perry KS
H-18
N-5.5 UNI +spin
--