Is this fixable? It’s a Catyak and the fins where the rudder is bolted snapped off.
I had trouble with the pictures. They’re in the “rudder repair” album.
Thanks,
Sue
D0A71512-6F8F-4E50-9686-86B2C439AF79
7525AF2D-795D-4C4A-9C20-DE9C630CF44A
Edited by hokypuk on Jul 11, 2022 - 10:08 AM.
Rudder repair
-
- Rank: Lubber
- Registered: Aug 06, 2018
- Last visit: Jul 14, 2022
- Posts: 9
Posted: Jul 10, 2022 - 11:36 PM
-
- Rank: Mate
- Registered: Jul 29, 2015
- Last visit: Apr 24, 2024
- Posts: 578
Posted: Jul 11, 2022 - 08:32 AM
This is the only image I saw. Doesn't make much sense to me.
--
Tom
NACRA 5.7 (1984 Sail 181)
Pennsylvania
-- -
- Rank: Lubber
- Registered: Aug 06, 2018
- Last visit: Jul 14, 2022
- Posts: 9
Posted: Jul 11, 2022 - 09:10 AM
Please let me know if I fixed the pictures. Thank you!
Edited by hokypuk on Jul 11, 2022 - 06:35 PM. -
- Rank: Lubber
- Registered: Aug 06, 2018
- Last visit: Jul 14, 2022
- Posts: 9
Posted: Jul 11, 2022 - 05:30 PM
-
- Rank: Mate
- Registered: Jul 29, 2015
- Last visit: Apr 24, 2024
- Posts: 578
Posted: Jul 11, 2022 - 07:48 PM
Maybe try hosting on Imgur and posting a link. A verbal description of your concern would go a long way.
Edited by tominpa on Jul 11, 2022 - 08:49 PM.
--
Tom
NACRA 5.7 (1984 Sail 181)
Pennsylvania
-- -
- Rank: Lubber
- Registered: May 10, 2007
- Last visit: Aug 13, 2023
- Posts: 22
Posted: Jul 12, 2022 - 12:56 PM
looks like you will need to move the hinge down, or add a strip of material to the side of that flange. Then mount the hinge to the new piece.
link to a sceenshot of the transom
-
- Rank: Lubber
- Registered: Aug 06, 2018
- Last visit: Jul 14, 2022
- Posts: 9
Posted: Jul 14, 2022 - 07:26 PM
Thank you! I don’t know what I’m doing… is the flange the plastic fin?
What would I use to fix it?
https://imgur.com/FnfjhAi
https://imgur.com/SbYxh22 -
- Rank: Lubber
- Registered: Oct 16, 2021
- Last visit: Jun 12, 2023
- Posts: 34
Posted: Jul 16, 2022 - 07:14 PM
What I would do is remove the broken piece and glue it back on with west system G-flex. This is only to align
everything and use it as a spacer. Next go to a big box store or a metal supplier and get a piece of 1 inch wide
aluminum flat bar. put a piece on either side of the fin and either rivet or bolt it to the fin. drill through the aluminum pieces and bolt the rudder hinge back on. I probably would extend the aluminum high enough so
that you could also attach a piece to the rib on top of the hull. Where are you located? Maybe someone here is close by and could help out?
GDog -
- Rank: Mate
- Registered: Jul 29, 2015
- Last visit: Apr 24, 2024
- Posts: 578
Posted: Jul 16, 2022 - 10:13 PM
Image assist: Just put the URL for your image in between Image tags. Click Image in the reply menu.
--
Tom
NACRA 5.7 (1984 Sail 181)
Pennsylvania
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.