mast hound damage/wear on an Inter 20 with carbon mast
-
- Rank: Lubber
- Registered: Aug 12, 2014
- Last visit: Apr 02, 2024
- Posts: 11
Posted: Jul 09, 2022 - 10:41 AM
I bought an Inter 20 last season, and yesterday I removed all the tape on the fittings to replace the standing rigging and discovered a crack almost to the hole for the rigging (and an elongated hole) in the mast hound. I'm guessing it's been there for some time. Wondering if it can be repaired so I can finish the season, like with washers or something...replacement hounds are very different now from Nacra. Should I be concerned about drilling new holes and riveting the mast, or is it really just like doing it to an aluminum mast? As an aside I've tried to include a photo but couldn't make it work...
-
- Rank: Mate
- Registered: Jan 14, 2004
- Last visit: Apr 21, 2024
- Posts: 859
Posted: Jul 09, 2022 - 11:17 AM
Your post is a little confusing.
An elongated hole in the SS mast hound is normal.
"crack almost to the hole for the rigging" . . . ??
if the crack is in the mast hound take it to a welder who works with SS.
--
Philip
-- -
- Rank: Mate
- Registered: Jan 14, 2004
- Last visit: Apr 21, 2024
- Posts: 859
Posted: Jul 09, 2022 - 11:20 AM
I think I have a spare mast hound but I'm not sure that you need one.
--
Philip
-- -
- Rank: Lubber
- Registered: Aug 12, 2014
- Last visit: Apr 02, 2024
- Posts: 11
Posted: Jul 09, 2022 - 02:05 PM
Hi Philip, I reached out to the guy I got the boat from and he actually had another one, so he's sending it to me. I'll investigate repairing the current one as well after I've removed it. Thanks for the response.
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.