Towing and Anchoring a Beachcat :: Catamaran Sailboats at TheBeachcats.com

Welcome anonymous guest

Please Support
TheBeachcats.com

Towing and Anchoring a Beachcat

goodsailing

Rank: Mate

Registered: Feb 18, 2013

Last visit: Jul 19, 2015

Posts: 396
Posted: Mar 12, 2015 - 04:07 PM

A few things: if towed where is the line held on the boat? Where would one tie an anchor rode to the boat? tks

--
Goodsailing

Laser-Standard Rig (Sold 6/15)
H18 (Sold 7/15)
Building 19' Tacking Outrigger
Balt-Wash Area
--
DamonLinkous

Rank: Administrator

Registered: Jul 19, 2001

Last visit: Apr 01, 2024

Posts: 3428
Posted: Mar 12, 2015 - 04:49 PM

I split this out before it got lost in the referb topic. Best to start new topics when the subject changes, people stop looking at a topic if they think they already know what is in there.

--
Damon Linkous
1992 Hobie 18
Memphis, TN

How To Create Your Signature

How To Create Your Own Cool Avatar

How To Display Pictures In The Forums.
--
Andinista

Rank: Mate

Registered: Aug 18, 2003

Last visit: Dec 13, 2023

Posts: 880
Posted: Mar 12, 2015 - 07:42 PM

Discard the front beam: when towed it won´t follow, when anchored it will tend to "sail" around
davefarmer

Rank: Mate

Registered: Oct 26, 2002

Last visit: Sep 23, 2019

Posts: 390
Posted: Mar 12, 2015 - 08:54 PM

The best arrangement I've found is a line tied into a bridle, secured to the main beam just inside the hulls( wrap the line around the beam a couple of times before tying it off so it doesn't slide towards the center and put strain on the tramp), so that it extends a foot or so in front of the bows, with a loop tied into it dead center. You can adjust the distance of the loop ahead of the beam to see what works best with your particular boat. This gives you some ability to limit the boats strong desire to wander back and forth, either being towed or at anchor, and transfer the load to a solid part of the boat. But cats really don't like either. If towing I've found it easiest on the boat to have someone aboard steering. I'll only leave a cat at anchor for a short time when I'm nearby should the breeze pick up. They're easily damaged being jerked around in a chop.

Dave
kasper

Rank: Mate

Registered: Aug 17, 2010

Last visit: Oct 31, 2021

Posts: 104
Posted: Mar 13, 2015 - 06:47 AM

Don't tie off to the crossbeam, the others are right -it'll wander back and forth all day and sit parallel to the waves resulting in some violent side to side bobbing. You HAVE to tie off at the bows to avoid this. I added a small shackle to each hull's forestay bridle attachment. Then i tied a length of rope between them, and tied a loop into the center with a hook. The resulting bridle is just long enough that I can hook it to the front crossbeam when not in use and not drag in the water. With this setup my crew can lay on the tramp up front, hold the hook on the bridle and clip it to our mooring buoy as I sail up to it. The bows will always point into the wind/waves. As Dave says though, it's not a good idea to leave a cat tied up unattended. I just do this between outings on sailing days.

--
Jason Kasper
2000 Mystère 5.0XL
Lake St Francis (St Lawrence River)
Lancaster, Ontario, Canada
--
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: Apr 06, 2024

Posts: 7088
Posted: Mar 13, 2015 - 06:55 AM

tie an anchor bridal system to the forestay bridal

or you can even drill into your bows (i would drill, fill with epoxy and redrill smaller hole into the the new epoxy)
goodsailing

Rank: Mate

Registered: Feb 18, 2013

Last visit: Jul 19, 2015

Posts: 396
Posted: Mar 13, 2015 - 07:05 AM

QuoteI added a small shackle to each hull's forestay bridle attachment. Then i tied a length of rope between them, and tied a loop into the center with a hook.

Thought that might be good idea for attaching rode/retainer, or tow line. Tks to all.

--
Goodsailing

Laser-Standard Rig (Sold 6/15)
H18 (Sold 7/15)
Building 19' Tacking Outrigger
Balt-Wash Area
--
Andinista

Rank: Mate

Registered: Aug 18, 2003

Last visit: Dec 13, 2023

Posts: 880
Posted: Mar 13, 2015 - 02:13 PM

I second the shackle to each hull forestay bridle attachment. But I'm too lazy so I just use the shackle that connects forestay and bridle. In any case, make sure to attach the line to something free of edges and moving parts that could cut it. It happened to me, I attached it to the mentioned shackle and the thimbles of the bridles did cut the rope. That was on a N5.0, what I did after that incident was adding another shackle at the same point. And instead of attaching the line directly to that shackle, I start from the center of the front beam, pass it through that shackle and then back to the tramp pocket. (So it's also my righting line, I just pull it back when needed). Now on my N5.5 the bridal foil has a hole where I can pass the line, no need for an additional shackle.

If you will be leaving the cat on the water, anchored or attached to a buoy, make sure to limit mast rotation. Constant movement, especially on short waves of lakes, not so much on the beach, may damage your stays. (been there too..).
kasper

Rank: Mate

Registered: Aug 17, 2010

Last visit: Oct 31, 2021

Posts: 104
Posted: Mar 17, 2015 - 06:31 AM

How would one limit mast rotation in this situation? My cat has a boomless main and no mast rotator.

--
Jason Kasper
2000 Mystère 5.0XL
Lake St Francis (St Lawrence River)
Lancaster, Ontario, Canada
--
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: Apr 06, 2024

Posts: 7088
Posted: Mar 17, 2015 - 07:19 AM

QuoteIf you will be leaving the cat on the water, anchored or attached to a buoy, make sure to limit mast rotation. Constant movement, especially on short waves of lakes, not so much on the beach, may damage your stays. (been there too..).

This makes sense to me, and i don't sail on a lake but
I have never had a shroud fail on me except from corrosion (a few broken strands)

when i anchor i
a. release the downhaul
b. snug up the main
these 2 things will point the boat into the wind and reduce the amount of dancing around
Andinista

Rank: Mate

Registered: Aug 18, 2003

Last visit: Dec 13, 2023

Posts: 880
Posted: Mar 17, 2015 - 11:43 AM

kasperHow would one limit mast rotation in this situation? My cat has a boomless main and no mast rotator.

On my old N5.0 I didn't have a mast rotator and never could limit mast rotation..
My N5.5 had a mast rotator but no cam cleats on the boom, I added them and almost never use them, except in this specific situation...
https://www.youtube.com/watch?v=ubuLmnrZAt4
Go to 4:48
dennisMe

Rank: Mate

Registered: Mar 04, 2010

Last visit: Jan 14, 2018

Posts: 128
Posted: Mar 18, 2015 - 11:23 AM

Another vote for the anchor bridle! I use it a lot and it works flawlessly. Less experience towing but as an anchor bridle it can't be beat.

With one addition. You may need a retrieval line to the center of the bridle to make it easy to get at once deployed. It needs to be just long enough so that it never takes any strain, whatever the direction the anchor is pulling in (Except backwards). Tie the other end off to somewhere you can get at. I found out the hard way and my Nacra 5.2 forward decks are round, thin and slippery when wet... So it wasn't easy getting the anchor back in!