So I have most of the parts to do the conversion but I need to know if anyone has done this or not. I am sure it can be done but would prefer not to reinvent the wheel if I do not have to. Things like spacers replacing hardware etc. I have the lower castings and the uppers and the arms. No cross bar yet but that will come when I need it. Any good pictures would help also. Thanks in advance. Ricardo.
--
Lake Perry KS
H-18
N-5.5 UNI +spin
--
Retrofitting newer style Inter rudders to 5.5.
-
- Rank: Mate
- Registered: Jan 24, 2012
- Last visit: Feb 26, 2016
- Posts: 173
Posted: Feb 10, 2012 - 09:08 AM
-
- Rank: Mate
- Registered: Jan 14, 2004
- Last visit: Apr 21, 2024
- Posts: 859
Posted: Feb 10, 2012 - 09:36 AM
If I'm reading your subject line correctly, you will have a problem with excessive cavitation and balance by using the the higher aspect rudders. You will completely loose the ability to steer with the spin up when it cavitates. You can also experience excessive cavitation (rudder stall) when reaching.
There are 3 generations of newer style rudders. The third generation is you least painful mod. If you use the first generation "pin" rudders you are going to hate yourself for doing the retrofit.
--
Philip
-- -
- Rank: Lubber
- Registered: Jul 06, 2008
- Last visit: Mar 23, 2016
- Posts: 94
Posted: Feb 10, 2012 - 11:56 AM
So does the 5.5 have the old "piv-matic (tm)" design? I have first gen inter-rudders on my inter-18. the are "touchy" and it does take some practice to get in/out from the wire w/o tacking/jibing the boat. A shorter boat is going to exacerbate (triple bonus word) this. There was a guy selling some 5.7 rudders off a boat that got crunched as inter rudders. They where not inter rudders, but fatter (prob like your 5.5), but had the inter/F-18 kick-up (no-piv-matic). These would work on any Nacra I would think. These might be better. They were like longer H-18 rudder blades.
--
nacra inter-18
CNBP
-- -
- Rank: Mate
- Registered: Jan 14, 2004
- Last visit: Apr 21, 2024
- Posts: 859
Posted: Feb 10, 2012 - 12:59 PM
The Inter 18 has higher aspect foils than the 5.5. Think short/wide vs. long/narrow.
--
Philip
-- -
- Rank: Mate
- Registered: Jan 24, 2012
- Last visit: Feb 26, 2016
- Posts: 173
Posted: Feb 10, 2012 - 02:32 PM
I got most of the parts from a 2000 Nacra 570 (I think). Sorry for the terminology mix up, I was more concerned about making it clear old vs new. I am still new to this Nacra stuff, been (still am) a Hobie guy. I am more interested in the system than the blades, the blades look very much the same as my 5.5. My whole goal is to get rid of the pivmatic system (sorry but I hate it). My concerns were more about the install on the hull than the blades. If necessary I will swap the 5.5 blades onto the new system. Some Epoxy and a drill should fix that.
My plan is to do one side and use the other original side to duplicate rake and toe in.
My question was to will I need to space the pintles off the stern, if so how much? things like that. My plan is to assemble the new and match it up to the old as close as possible. I am short one lower casting and I should have that when the guy gets back in town.
Thanks for the replies. Richard.
--
Lake Perry KS
H-18
N-5.5 UNI +spin
-- -
- Rank: Mate
- Registered: Aug 13, 2010
- Last visit: Mar 10, 2014
- Posts: 294
Posted: Feb 10, 2012 - 08:30 PM
AS someone who hates the Nacra system, I am waiting with baited breath. I got some H-18 blades and castings so I could change the 5.2 to a different system..I want one that that did not require a action when you hit a small obstruction AND one could lock blades in place with out depending on bungi to old them up on the road or when beaching. NOt sure about the mounting at this point cuz I just found them but a bud from the far away coast sold the H18 set he had rather than make the change.. I would pass on the 5.2 but I love the boat.. Hal
--
Hal Liske
Livermore CA
H 16 (6+ 1.. Friends) H 3.2 N 5.2 (2) H 17 (2) H-18
Nacra 5.8 (son's) H 20 (Friends)
It's a Sickness
I Need a A Cat Please
-- -
- Rank: Mate
- Registered: Sep 01, 2002
- Last visit: Apr 08, 2024
- Posts: 786
Posted: Feb 11, 2012 - 09:19 AM
You are using rudders from a boat with no center board vs one the has them.. You may want to look at using the rudders from a Inter 20 or Inter 18 as this may be a better match up...
The NACRA 580 is using this system and the boards are very similar to the Gen II rudders for the Inter/NACRA 20Here's a pic of a 580 with the system
Having come from a NACRA 5.8 system to the newer system it is night and day and most the guess work is taken out. I prefer the new system much better...
Regarding the rudder rake I personally I don't think you're going to have an issue... I would set i t up give it a sail. If you need to adjust you can do so with washers in the gudgeon bolts... Just be sure to silicone the snot out of it.
I have a bunch of extra parts...shoot me a PM if you need anything...
Having just looked at acquiring either the Gen II or the Gen III new style rudders for my Inter/NACRA 20 I went with the Gen II... As it was explained the Gen III is more for course racing and way more expensive.
Having a spin on the 5.5 I believe anything will be an improvement over what he has. Having a spin on my 5.8 was issue with the stock rudders...
I say I say I say pull the tiller boy!!!!! And once you got the windward rudder out of the water....yeiks!!! IMPO, a good set of Gen I will work for fine for this application...
Edited by JohnES on Feb 11, 2012 - 09:32 AM.
--
John Schwartz
Ventura, CA
-- -
- Rank: Mate
- Registered: Jan 24, 2012
- Last visit: Feb 26, 2016
- Posts: 173
Posted: Feb 11, 2012 - 11:10 AM
Thanks John, I may contact you as I am peiceing the thing together. I have a hooter on the boat now and no issues with the rudders except the pivmatic fiasco. So I am pretty sure the blades will be fine whether I use the 5.5 or the 570s.
I Got most of the parts from one guy, then got another arm and lower casting from another. So far i am lacking one lower casting and the cross bar. But I may be able to use some other parts I have for the cross bar. I will not know for sure of what else I am missing but will let you know when I get to that point. AND when it warms up, 8 degrees this morning and that is Degrees F for you metric guys, dang cold. Doing a soft spin and rudder swap on a boat I have only had a year and am not familiar with is a steep learning curve.
Thanks to all, Ricardo.
--
Lake Perry KS
H-18
N-5.5 UNI +spin
-- -
- Rank: Mate
- Registered: Jun 17, 2011
- Last visit: Sep 24, 2023
- Posts: 783
Posted: Feb 11, 2012 - 08:34 PM
Good luck, I have Gen 1 rudders on my 20 and I really like them. I will say I liked the Hobie 18 rudder system more than my inter rudders.
--
Greenville SC
Offering sails and other go fast parts for A-class catamarans
-- -
- Rank: Mate
- Registered: Jan 24, 2012
- Last visit: Feb 26, 2016
- Posts: 173
Posted: Feb 16, 2012 - 10:21 AM
Anyone have a big diagram of what everything is and where it goes so I know what I am missing? Thanks in advance, Richard.
--
Lake Perry KS
H-18
N-5.5 UNI +spin
-- -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Feb 16, 2012 - 10:40 AM
http://www.nacra.ca/image…acra2007partscatalog.pdf
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
-- -
- Rank: Mate
- Registered: Jan 24, 2012
- Last visit: Feb 26, 2016
- Posts: 173
Posted: Feb 16, 2012 - 01:07 PM
Great stuff now I know what to call everything. Adjuster VS rake eye bolt. Thanks again, Ricardo.
--
Lake Perry KS
H-18
N-5.5 UNI +spin
-- -
- Rank: Mate
- Registered: Jan 24, 2012
- Last visit: Feb 26, 2016
- Posts: 173
Posted: Feb 20, 2012 - 07:13 AM
John ES I sent you a PM about parts. Ricardo.
--
Lake Perry KS
H-18
N-5.5 UNI +spin
-- -
- Rank: Lubber
- Registered: Jun 23, 2011
- Last visit: Jul 20, 2012
- Posts: 50
Posted: Feb 20, 2012 - 09:04 AM
I have been following along oben , just faired and re-gelcoated rudders dont think 5.5 system is up to the task.wondering which system i have ?There are no pivmatic release there is hole in rudder arm ,i think there was one at some point.The system there is has a continuous line that runs through cam cleats on top of rear beam does any of
sound familiar?schock cords pull rudders up.Does this sound like a inter system,80's nacra,custom ? i know a picture would have simplified this..
will learn to take photos and up load
89 5.5sl -
- Rank: Mate
- Registered: Jan 24, 2012
- Last visit: Feb 26, 2016
- Posts: 173
Posted: Feb 20, 2012 - 11:38 AM
If it is an 89 it is the older pivmatic system. The pivots may have been removed in place of an up/down line and a single cleat on either side. The newer system does not use shock cords. My expeience is the rudders must be able to kick up on their own or they will break or break something. I kicked on last year and the pivmatic system worked on letting the rudder kick up. That part of the system is fine, it is the rest of it that blows chunks. Do a search and you will find pix of the old system and likely the new system as well.
I plan to take pix of the install when the time comes, still gathering parts at this point. HTH, Ricardo.
--
Lake Perry KS
H-18
N-5.5 UNI +spin
-- -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Feb 20, 2012 - 01:47 PM
No.
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Mate
- Registered: Jan 14, 2004
- Last visit: Apr 21, 2024
- Posts: 859
Posted: Feb 20, 2012 - 07:11 PM
Ricardo,
You shouldn't hate the pivmatic system. Yeah, it's an older system but when they are tuned right and every thing works, it is a great system. Chances are something ain't right with what you got. There are several threads here that address proper set up, tuning, and upgrades to the original system. The newer system is nice and has it's advantages, but they have issues themselves, like bent cam pins, broken eye bolts, deformed cams, springs needing replacing, broken castings and the dreaded broken rudder pintle (make sure you get the double welded pintles). When all is said and done you will probably like the new set up.
"Now, I say, I say, I say pay attention boy." As for the 1st Gen Inter rudders, they will stall. They will stall on any boat you put them on. You could put them on a rubber boat in the bathtub and they will stall. Not necessarily a bad thing in it's self, 'cause it teaches you when you load them up and cavitate how to trim/sail better to correct. The reason Nacra developed the 2nd and 3rd generation rudders is because the originals stalled so easily, so they addressed the problem. Looks like you are sailing a modified platform already (spin added) so you will be shifting your COE and loading up the rudders already.
That's because he shifted the COE and was loading up the rudders with the spin up. It would be more helpful to have a larger wider rudder, not a narrower smaller one.
Got It?
--
Philip
-- -
- Rank: Mate
- Registered: Jan 24, 2012
- Last visit: Feb 26, 2016
- Posts: 173
Posted: Feb 20, 2012 - 09:34 PM
The ones I have are tuned right, when down they are fine, they work, they kick up. The BS bungee up is a pain, the no good way to keep them up when on the trailer is BS and yes I know about the line up as opposed to the bungee. But WTF 4 lines on the back of the boat vs one flick of the rudder. The do not really come up when up, they just pivot to horizontal. Getting them on the beach (we use PVC pipe to protect the hulls and these rudders get hung up all the time. The whole thing is just poorly designed IMO.
I have a local with I 17 and he loves the rudder set up on it. He is hard on stuff, so far a couple of the couplers have failed, not spring failure and no real issues. He sails 200 days a year and for hours a day and so far no problems. I know the blades may be different but they look very close to my 5.5 blades so I am willing to give it a gamble. I will however remember your concerns and sail accordingly. Thanks for all the help it has been a learning experience already. Cheers Ricardo.
--
Lake Perry KS
H-18
N-5.5 UNI +spin
-- -
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Feb 21, 2012 - 10:59 AM
Anyone have pics of the different generations to compare?
IMO you're doing it wrong. You should just have a doubled up shock cord and one line. You can get the shock cord tight enough to raise the rudders with no ill effects -- just keep pulling more shock cord out of the top and cinching it with hog rings -- but you have to use the pivmatics with this setup.
I didn't use the standard cleat and eyelet with this setup, but IMO it works slightly better as the rudder won't accidentally re-cleat itself.
Just use a spare piece of 3/16 line or similar and tie them up when on the trailer. You don't need to use the same system that operates them in the water for trailering.
--
Rob
OKC
Pile of Nacra parts..
-- -
- Rank: Mate
- Registered: Jan 24, 2012
- Last visit: Feb 26, 2016
- Posts: 173
Posted: Feb 21, 2012 - 06:49 PM
I have double shock cord, I have them tuned right, I have the extra line for trailering. The system is just poor and always has been IMO, Ricardo.
--
Lake Perry KS
H-18
N-5.5 UNI +spin
--
Users on-line
This list is based on users active over the last 60 minutes.