taking apart Prindle 16, help with two bolts PLZ
-
- Rank: Lubber
- Registered: Oct 01, 2008
- Last visit: Sep 29, 2020
- Posts: 7
Posted: Oct 01, 2008 - 06:25 PM
I need help removing the bow crossbar. I have removed the two outer bolts easily, but am having trouble with the two bolts on the inside that you cannot get to from anywhere I can see. They seem to just spin when I get on them with a 1/2 socket. What can I do to get these so I can seperate the hulls & throw this mofo in my basement for winter? -
- Rank: Lubber
- Registered: Oct 01, 2008
- Last visit: Sep 29, 2020
- Posts: 7
Posted: Oct 01, 2008 - 07:58 PM
nevermind, discovered you can go in through the ports in the middle of each hull. disassembled & in the basement.
Users on-line
This list is based on users active over the last 60 minutes.