Welcome anonymous guest

Please Support
TheBeachcats.com

P16 shroud anchor bar - bolt size  Bottom

  • westmatt
    westmatt
    Lubber
    • Rank: Lubber
    • Registered: Sep 23, 2022
    • Last visit: Apr 11, 2024
    • Posts: 79
    Link to this post Posted: Feb 28, 2023 - 02:07 PM
    I have posed this question to Murrays already, but like some previous communications, they don't respond to me. What is the bolt needed (the one that goes through the crossbar and into the anchor bar)?

    thanks,
    -Matt
  • texastuma

    Mate
    • Rank: Mate
    • Registered: Nov 22, 2012
    • Last visit: Apr 11, 2024
    • Posts: 397
    Link to this post Posted: Feb 28, 2023 - 02:39 PM
    westmattI have posed this question to Murrays already, but like some previous communications, they don't respond to me. What is the bolt needed (the one that goes through the crossbar and into the anchor bar)?

    thanks,
    -Matt


    Which boat? On the Prindle, it is a 1/4" hex bolt. I'm not positive on the length because I have modified mine from stock.

    --
    Scott

    Prindle Fleet 2
    TCDYC

    Prindle 18-2 Mod "FrankenKitty"
    Tornado Classic "Fast Furniture"
    Prindle 19 "Mr. Wiggly"
    Nacra 5.8 "De ja vu"
    Nacra 5.0
    Nacra 5.8
    Tornadoes (Reg White)
    --
  • westmatt
    westmatt
    Lubber
    • Rank: Lubber
    • Registered: Sep 23, 2022
    • Last visit: Apr 11, 2024
    • Posts: 79
    Link to this post Posted: Feb 28, 2023 - 03:15 PM
    It's a 16.
  • westmatt
    westmatt
    Lubber
    • Rank: Lubber
    • Registered: Sep 23, 2022
    • Last visit: Apr 11, 2024
    • Posts: 79
    Link to this post Posted: Feb 28, 2023 - 06:23 PM
    OK, got a reply from Murrays. No word on TPI, but it's 5/16" x 4.25".



    Edited by westmatt on Feb 28, 2023 - 04:43 PM.

No HTML tags allowed (except inside [code][/code] tags)

  • Options

Users on-line

  • 0 users

This list is based on users active over the last 60 minutes.

Search The Beachcats