I have posed this question to Murrays already, but like some previous communications, they don't respond to me. What is the bolt needed (the one that goes through the crossbar and into the anchor bar)?
thanks,
-Matt
P16 shroud anchor bar - bolt size
-
- Rank: Lubber
- Registered: Sep 23, 2022
- Last visit: Mar 14, 2023
- Posts: 40
Posted: Feb 28, 2023 - 02:07 PM
-
- Rank: Mate
- Registered: Nov 22, 2012
- Last visit: Mar 13, 2023
- Posts: 309
Posted: Feb 28, 2023 - 02:39 PM
Which boat? On the Prindle, it is a 1/4" hex bolt. I'm not positive on the length because I have modified mine from stock.
--
Scott
Prindle 18-2 Mod "FrankenKitty"
Tornado Classic "Fast Furniture"
Prindle 19 "Mr. Wiggly" - gone
Nacra 5.8 "De ja vu"
Nacra 5.0
Nacra 5.8
Tornadoes (Reg White)
-- -
- Rank: Lubber
- Registered: Sep 23, 2022
- Last visit: Mar 14, 2023
- Posts: 40
Posted: Feb 28, 2023 - 03:15 PM
It's a 16. -
- Rank: Lubber
- Registered: Sep 23, 2022
- Last visit: Mar 14, 2023
- Posts: 40
Posted: Feb 28, 2023 - 06:23 PM
OK, got a reply from Murrays. No word on TPI, but it's 5/16" x 4.25".
Edited by westmatt on Feb 28, 2023 - 04:43 PM.
