Hi!
Last time I renewed the non-skid strips on my hulls they didn’t adhere well, I was too lazy to properly clean the hull surface after removing the old ones. Now I decided to put eva foam on a larger area, got some with 3M adhesive. The question is how should I clean the glue from the strips that I removed? Thanks!
Hull cleaning, glue removal
-
- Rank: Mate
- Registered: Aug 18, 2003
- Last visit: Dec 13, 2023
- Posts: 880
Posted: Jul 03, 2022 - 04:22 PM
-
- Rank: Mate
- Registered: Oct 07, 2020
- Last visit: Feb 29, 2024
- Posts: 359
Posted: Jul 03, 2022 - 08:33 PM
Naptha works well on adhesive residue. I'd check to make sure it does nothing bad to your hulls though.
--
Bryan in Poplar Grove, IL
Supercat 17, unknown year. Future project
Hobie 16, 1977 - died a spectacular death https://youtu.be/Y7O22bp2MVA
Hobie 16, 1978 - current boat
-- -
- Rank: Mate
- Registered: Nov 22, 2012
- Last visit: Apr 11, 2024
- Posts: 397
Posted: Jul 05, 2022 - 05:44 PM
Goo Be Gone works very well for adhesive. You can also use acetone.
--
Scott
Prindle Fleet 2
TCDYC
Prindle 18-2 Mod "FrankenKitty"
Tornado Classic "Fast Furniture"
Prindle 19 "Mr. Wiggly"
Nacra 5.8 "De ja vu"
Nacra 5.0
Nacra 5.8
Tornadoes (Reg White)
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.