I have two long battens that came with the G-Cat 5.7 main that fit on the bottom slot.
One is standard (like the others) 1" width and the other is about 2" width.
Which is the preferred Batten width for the bottom batten on this boomless Main?
This is a Supersail standard OEM sail for a 28' mast.
Thanks!
--
G-Cat 5.7
Sarasota
--
Batten Question for Boomless
-
- Rank: Lubber
- Registered: Jun 22, 2015
- Last visit: May 13, 2023
- Posts: 26
Posted: Sep 12, 2021 - 08:41 AM
-
- Rank: Mate
- Registered: May 08, 2013
- Last visit: Oct 02, 2023
- Posts: 508
Posted: Sep 12, 2021 - 10:57 AM
Not much of an answer to your question but my Supersails 5.7 main has all same size battens, that’s how it came from them -
- Rank: Mate
- Registered: May 09, 2009
- Last visit: May 15, 2023
- Posts: 684
Posted: Sep 12, 2021 - 12:06 PM
Not sure if this relates, but the Nacra 6.0 uses a heavier bottom batten in heavy air and is also boomless. With
the large jib in heavy air the main gets back winded and partially inverts. They call this the main sail Hula. The heavier batten is supposed to minimize this.
--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
-- -
- Rank: Lubber
- Registered: Jun 22, 2015
- Last visit: May 13, 2023
- Posts: 26
Posted: Sep 12, 2021 - 02:05 PM
A heavier batten all the time or just in heavy air? Are they swapping them out?
--
G-Cat 5.7
Sarasota
-- -
- Rank: Mate
- Registered: May 09, 2009
- Last visit: May 15, 2023
- Posts: 684
Posted: Sep 12, 2021 - 03:55 PM
When I had my 6.0 we would swap it. Not sure what others are doing but it is sold for heavy air use. I think it
would effect sail shape in lighter air.
--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
-- -
- Rank: Mate
- Registered: Apr 07, 2017
- Last visit: Apr 11, 2024
- Posts: 340
Posted: Sep 12, 2021 - 04:51 PM
I've used them both in a 5.7 and can't tell any difference.
--
Bill Townsend
G-Cat 5.0
Sarasota
--
Users on-line
This list is based on users active over the last 60 minutes.