I am building a Frankencat2 from two 5.8 hulls with 10.5 ft wide beams. I have a pair of Marstrom Tornado rudders and an alu Marstrom Tornado rig, but no daggerboards, although I have a pair of 5.5 daggerboards that I will lengthen and beef up.The boards really needs to be fattened up to 25mm thickness, as they are only 20mm(7%), enough room in the daggerboard slot(image2). I have almost all measures for the 5.8 boards, but not how long up the straight trailing edge reaches? Anyone out there who can check?
Edited by revintage on Dec 08, 2020 - 01:53 PM.
--
Brgds
Lars
Frankentri 5.8/5.5/Inter20
Aerow trimaran foiler
https://www.facebook.com/groups/1192604934176635
--
5.8 daggerboard measures
-
- Rank: Mate
- Registered: Aug 13, 2017
- Last visit: Nov 29, 2023
- Posts: 280
-
- Rank: Mate
- Registered: Jan 14, 2004
- Last visit: Apr 21, 2024
- Posts: 859
I have several daggerboards available to sell for the 5.8 and 6.0.
--
Philip
-- -
- Rank: Mate
- Registered: Aug 13, 2017
- Last visit: Nov 29, 2023
- Posts: 280
Hi Philip,
Thanks for the offer, but I live in Sweden. Shipping from the US is nono due to the extreme cost. I normally buy catamaran stuff from BNR in the Netherlands. But I am not intersted in buying, just rebuilding the boards taking up place in my workshop. I use Nacra F18 Infusion daggerboards in the 5.5 nowadays.
Edited by revintage on Dec 08, 2020 - 11:07 AM.
--
Brgds
Lars
Frankentri 5.8/5.5/Inter20
Aerow trimaran foiler
https://www.facebook.com/groups/1192604934176635
-- -
- Rank: Mate
- Registered: Nov 22, 2012
- Last visit: Apr 11, 2024
- Posts: 397
You can measure the freeboard of the centerboard trunk and subtract out from there. I would have loved to expand the 6.0 to 10' wide. Having the 18-2 10' wide is a speed freak. I'm very interested in seeing the end product.
--
Scott
Prindle Fleet 2
TCDYC
Prindle 18-2 Mod "FrankenKitty"
Tornado Classic "Fast Furniture"
Prindle 19 "Mr. Wiggly"
Nacra 5.8 "De ja vu"
Nacra 5.0
Nacra 5.8
Tornadoes (Reg White)
--