[quote=texastuma][quote=revintage]I am building a Frankencat2 from two 5.8 hulls with 10.5 ft wide beams. I have a pair of Marstrom Tornado rudders and an alu Marstrom Tornado rig, but no daggerboards, although I have a pair of 5.5 daggerboards that I will lengthen and beef up.The boards really needs to be fattened up to 25mm thickness, as they are only 20mm(7%), enough room in the daggerboard slot(image2). I have almost all measures for the 5.8 boards, but not how long up the straight trailing edge reaches? Anyone out there who can check?
[img]http://soderquist.se/58cbq2.jpg[/img]
[img]http://soderquist.se/55in58.jpg[/img]
[img]http://soderquist.se/F2.jpg[/img]Edited by revintage on Dec 08, 2020 - 01:53 PM. [/quote]
I will say that when I had my 5.8, we had 4 sets of boards - all with different cord thicknesses. We acquired all of them that way... We would swap boards depending on the conditions.[/quote]
No HTML tags allowed (except inside [code][/code] tags)