need to replace the ball bearing in my traveler could someone tell me how many and what size i need to order
thka
5.2 traveler
-
- Rank: Lubber
- Registered: Jan 19, 2017
- Last visit: May 22, 2022
- Posts: 39
Posted: Oct 21, 2019 - 05:49 PM
-
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Apr 06, 2024
- Posts: 7088
Posted: Oct 21, 2019 - 07:01 PM
considering your boat came out 44 years ago you may need to include what type of traveler car you have
maybe a pic too? -
- Rank: Lubber
- Registered: Jan 19, 2017
- Last visit: May 22, 2022
- Posts: 39
Posted: Oct 21, 2019 - 07:21 PM
its a harken traveler! -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Apr 06, 2024
- Posts: 7088
Posted: Oct 21, 2019 - 08:17 PM
https://www.murrays.com/product/28-0177/ -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Apr 10, 2024
- Posts: 2524
Posted: Oct 21, 2019 - 10:24 PM
https://www.murrays.com/product/28-0177
Or call Sailing Services, they sold me the bearings to rebuild a Harken furler, good people.
IIRC, you need 21 for the traveler.
Edited by Edchris177 on Oct 21, 2019 - 10:27 PM.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Oct 22, 2019 - 11:04 AM
I have a Harken traveler with captured bearings. Send cell for pic. 909-800-5237 -
- Rank: Lubber
- Registered: Jan 19, 2017
- Last visit: May 22, 2022
- Posts: 39
Posted: Oct 22, 2019 - 04:15 PM
thanks everyone FYI harken has a video on the rebuild and i ordered everything from murrys thanks again -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Apr 10, 2024
- Posts: 2524
Posted: Oct 22, 2019 - 07:46 PM
Remember, the car is only half the system. Have a close look at the track. Rough spots or grit can ruin your new cars bearings pretty quick.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Nov 22, 2012
- Last visit: Apr 11, 2024
- Posts: 397
Posted: Oct 23, 2019 - 03:58 PM
I know the car. The bearings are not enclosed. You will need a loading car. I may have one. It is a blue piece that looks like a traveler track. It has a cut out for loading the ball bearings. I don't recall how many ball bearings. I used to have a jar full of bearings for this reason. You can call Harken direct and they will send/sell you the loader and the bearings. .
--
Scott
Prindle Fleet 2
TCDYC
Prindle 18-2 Mod "FrankenKitty"
Tornado Classic "Fast Furniture"
Prindle 19 "Mr. Wiggly"
Nacra 5.8 "De ja vu"
Nacra 5.0
Nacra 5.8
Tornadoes (Reg White)
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Apr 06, 2024
- Posts: 7088
Posted: Oct 23, 2019 - 04:58 PM
you can also use shaving cream to keep the balls in place and simply rinse away the shaving cream when done
-
- Rank: Mate
- Registered: Nov 22, 2012
- Last visit: Apr 11, 2024
- Posts: 397
Posted: Oct 24, 2019 - 02:36 PM
[quote=MN3]you can also use shaving cream to keep the balls in place and simply rinse away the shaving cream when done
Good to know... My Tornado has a Ronstan car with open races... I do have a loader, but I'll keep that in mind.
--
Scott
Prindle Fleet 2
TCDYC
Prindle 18-2 Mod "FrankenKitty"
Tornado Classic "Fast Furniture"
Prindle 19 "Mr. Wiggly"
Nacra 5.8 "De ja vu"
Nacra 5.0
Nacra 5.8
Tornadoes (Reg White)
--
Users on-line
This list is based on users active over the last 60 minutes.