Need help on finding a halyard line for an 18.2 prindle. When I bought the boat a few items were missing.will a prindle 18 interchange?
--
Tom Bainbridge, Ga. Hobie16, prindle 18.2
--
Prindle 18.2
-
- Rank: Lubber
- Registered: Feb 28, 2017
- Last visit: Jun 20, 2018
- Posts: 90
Posted: Dec 26, 2017 - 02:35 PM
-
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Dec 13, 2023
- Posts: 1445
Posted: Dec 27, 2017 - 12:25 PM
Hey Tom,
This will help:
https://www.thebeachcats.…ictures?g2_itemId=123740
Halyard is 62 feet of 3/16" dacron. I used a slightly smaller diameter, newer composite line.
There is all kinds of 18-2 info in this album, so look around.
https://www.thebeachcats.…ictures?g2_itemId=123714
Edited by klozhald on Dec 28, 2017 - 10:31 AM.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Lubber
- Registered: Feb 28, 2017
- Last visit: Jun 20, 2018
- Posts: 90
Posted: Dec 31, 2017 - 08:45 PM
Thanks Bob
--
Tom Bainbridge, Ga. Hobie16, prindle 18.2
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.