Welcome anonymous guest

Please Support
TheBeachcats.com

Best non skid for F18 deck  Bottom

  • Hydroturf or Seadek
  • I used the stuff Falcon Marine sells, which worked out pretty well. You want the stuff with a 3M adhesive already on the decking.

    Raptordeck looks like a good alternative, they may have a kit that fits your boat which will save a ton of time: http://www.raptordeck.com/

    I'd go for the diamond plate look and in black, which doesn't stain as easily as the other colors.
  • QuoteI used the stuff Falcon Marine sells

    I have been looking into adding some non skid too. What does Falcon Marine sell. I was considering the Hydroturf because I have heard good things about it.

    --
    Pete
    2001 NACRA 450
    DeLand, FL
    --
  • We sell kits for modern Nacras for around $150, don't underestimate the time it takes to cut into a pattern and bevel the edge!
    But for any other boat you can buy a sheet for around $100 ($30 to add Pressure Sensitive Adhesive PSA), in the past when I priced anything else it was much more expensive.
    http://hydroturf.com/products/Sheets_of_Hydro-Turf/PWC___Boating
  • QuoteWe sell kits for modern Nacras for around $150, don't underestimate the time it takes to cut into a pattern and bevel the edge!

    So for around $150 it would be shipped to me cut to fit a 2001 NACRA 450?

    --
    Pete
    2001 NACRA 450
    DeLand, FL
    --
  • nacrasailingWe sell kits for modern Nacras for around $150, don't underestimate the time it takes to cut into a pattern and bevel the edge!
    But for any other boat you can buy a sheet for around $100 ($30 to add Pressure Sensitive Adhesive PSA), in the past when I priced anything else it was much more expensive.
    http://hydroturf.com/products/Sheets_of_Hydro-Turf/PWC___Boating


    I'm tempted to purchase a kit for a NACRA 570 and make some manual adjustments to adapt it to my old 5.7. How do you put in an order for a precut 570?

    --
    Tom
    NACRA 5.7 (1984 Sail 181)
    Pennsylvania
    --
  • HULLFLYERHydroturf or Seadek


    They are about the same IMO.

    I am a hydroturf dealer and can offer a small discount from their online pricing.

    --
    Greenville SC

    Offering sails and other go fast parts for A-class catamarans
    --
  • Would you have a pre cut kit for a 2005 Nacra f18
    The 2005 has different size dagger boards
    They are approx 9 inches wide instead of 8 inches like most Nacrasi

This list is based on users active over the last 60 minutes.

  • May 24, 2017
  • No events scheduled.