Tornado main sail on a P19
-
- Rank: Lubber
- Registered: Jun 30, 2012
- Last visit: Jan 12, 2023
- Posts: 60
Posted: Feb 23, 2015 - 04:00 PM
Tornado sails are far more available on the used market . Can they be used on a P19 mx ? i a trying to weigh my options against spending the $2500 on brand new P19 sails . -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Apr 06, 2024
- Posts: 7088
Posted: Feb 23, 2015 - 05:27 PM
yes but it will probably need to be cut a little
T masts are 31'
p19 Mast Length: 30'3" (9.22m).
i have had 3 or 4 on my mystery 5.5 mast (30' mast) -
- Rank: Lubber
- Registered: Jun 30, 2012
- Last visit: Jan 12, 2023
- Posts: 60
Posted: Apr 03, 2015 - 06:21 AM
Ok MN3 ..thanks for the info..
so no other mods required.. (for the lack of the right terms) the front of the sail has the rope shape to slide into and up the mast and the cunningham block attachment at front of sail is at the right height /place ?
just want to crystal clear before I make a purchase
txs -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Apr 06, 2024
- Posts: 7088
Posted: Apr 03, 2015 - 07:06 AM
i am not sure
but i dont think so -
- Rank: Lubber
- Registered: Nov 07, 2013
- Last visit: Nov 10, 2017
- Posts: 44
Posted: Apr 03, 2015 - 10:10 AM
I have a used Smyth jib and a used Danger jib, both measured good at nationals in 1997 and 1998 if you need head sails.
Edited by p8dawg on Apr 03, 2015 - 10:11 AM.
--
Peyton Adair
Prindle 18 classic
Hobie 17
Hobie Wave
Wichita KS
-- -
- Rank: Mate
- Registered: Sep 01, 2002
- Last visit: Apr 08, 2024
- Posts: 786
Posted: Apr 03, 2015 - 10:59 AM
May want to consider some used F-18 sails too.... no modifications needed...
--
John Schwartz
Ventura, CA
-- -
- Rank: Lubber
- Registered: Jun 30, 2012
- Last visit: Jan 12, 2023
- Posts: 60
Posted: Apr 07, 2015 - 01:55 PM
Anyone know how much US customs duty is involved in buying a sail from Europe . BNR site has some interesting deals on sails .. -
- Rank: Lubber
- Registered: Apr 10, 2013
- Last visit: Oct 25, 2015
- Posts: 94
Posted: Apr 07, 2015 - 03:38 PM
I have a C2 F18 main available. I understand it would fit easily.
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.