I just repaired my transom on my 5.2 (embarrassingly stupid). I am pitting my gudgeon on and was wondering, should I pit 5200 around the the gudgeon? Or should I use a silicon sealer around the bolts? I Any thoughts would be appreciated. I would love to finish today and sail this weekend.
--
Nacra 5.2
--
Gudgeon replacement 5200 or not.
-
- Rank: Mate
- Registered: May 29, 2010
- Last visit: Apr 28, 2015
- Posts: 454
Posted: Jul 18, 2013 - 09:04 AM
-
- Rank: Lubber
- Registered: Feb 20, 2012
- Last visit: Nov 18, 2017
- Posts: 38
Posted: Jul 18, 2013 - 09:47 AM
4200. You might want to pull it for some reason.
5200 is forever and almost never should be used. -
- Rank: Mate
- Registered: May 29, 2010
- Last visit: Apr 28, 2015
- Posts: 454
Posted: Jul 18, 2013 - 10:05 AM
Well I would hope this would be forever. That may be why I had a big chunk ripped out of the transom instead of just the backing plate. But do I want to place around the gudgeon or just silicon the bolts?
--
Nacra 5.2
-- -
- Rank: Lubber
- Registered: Feb 20, 2012
- Last visit: Nov 18, 2017
- Posts: 38
Posted: Jul 18, 2013 - 10:37 AM
4200 gudgeon plate. Tefgel or antiseize bolt threads. Bead of 4200 at bolt head. -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Apr 06, 2024
- Posts: 7088
Posted: Jul 18, 2013 - 10:48 AM
Tefgel is amazing product
3 years after application (and around 450 sails in salt water) I recently replaced my broken dolphin striker and the assembly has multiple grades of aluminum + ss screw&bolts.... no corrosion - tefgel was a glob of yuck... but still there.
was looking for (unsuccessfully) my tube this morning.. as i was replacing an exploded washer on my rear beam ... had to settle for lanacote
