Hey guys
Do you have ventilation holes in your cat boxes? If so how big, how many and where are they located on the box? I am re glassing an old one and I don't see any "intentional" ventilation holes, just curious what would be best in the South. Boat and trailer will be parked in the yard under a tarp.
Thanks
--
Jim
New Orleans
'83 H18 SX mods 2013 -
'65 Lavey Craft 2005 -
'69 Cal 25 1997 - 2001
'80 P16 1980 - 1996
--
Cat box ventilation
-
- Rank: Mate
- Registered: Nov 15, 2011
- Last visit: Jul 27, 2016
- Posts: 121
Posted: Apr 29, 2013 - 09:56 AM
-
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Apr 01, 2024
- Posts: 3428
Posted: Apr 29, 2013 - 11:30 AM
I think if you have a box that is otherwise air-tight it would be wise to have vents to allow contents to dry. Just make sure that they don't allow rain in and have screens to keep the critters out.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Dec 13, 2023
- Posts: 1445
Posted: Apr 29, 2013 - 11:48 AM
Had some in an old box- one small one each in front and back panels.
Glassed them over after the glued screen inside came off and let all kinds of bugs, bees and other vermin into the box one memorable spring.
No vents at all on current box.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Apr 06, 2024
- Posts: 7088
Posted: Apr 29, 2013 - 01:11 PM
best catbox design i have seen use very small downward facing vents (think of small ac vents with fixed slots) that were glassed into the box, and screened with very tight mesh to keep the smallest of aphids and other bugs out of your sails
one fore, one aft
Edited by MN3 on Apr 29, 2013 - 01:16 PM. -
- Rank: Mate
- Registered: Jan 24, 2012
- Last visit: Feb 26, 2016
- Posts: 173
Posted: Apr 29, 2013 - 04:19 PM
Put them on the sides. the front will get water in it when trailering and so will the rear. About 3 inch with tight screen and down facing vents. I bet McMastercarr has them. HTH, Ricardo.
--
Lake Perry KS
H-18
N-5.5 UNI +spin
-- -
- Rank: Mate
- Registered: Nov 15, 2011
- Last visit: Jul 27, 2016
- Posts: 121
Posted: Apr 30, 2013 - 07:29 PM
I will be adding vents with screens.
Thanks!!!!
--
Jim
New Orleans
'83 H18 SX mods 2013 -
'65 Lavey Craft 2005 -
'69 Cal 25 1997 - 2001
'80 P16 1980 - 1996
-- -
- Rank: Lubber
- Registered: Mar 16, 2005
- Last visit: Dec 29, 2019
- Posts: 16
Posted: Apr 30, 2013 - 08:18 PM
Lowes, Menards, HD make a aluminum 2" attic vent. Louvers with screen. Drill a 2" hole and press them in. I think I bought six of them for under $20. -
- Rank: Lubber
- Registered: Jan 05, 2013
- Last visit: Sep 22, 2014
- Posts: 78
Posted: Apr 30, 2013 - 09:04 PM
Check out McMaster Carr for enclosure drains and vents.
http://www.mcmaster.com/#enclosure-vents/=mjye8c
--
Craig
Windrider Rave Hydrofoil
Nacra 5.2 Restored and heavily modified
Nacra 5.2 (one under restoration)
Nacra 5.7
Nacra 5.8NA
SoCal
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.