My son and I finally got the Nacra ready to sail, been waiting weeks for the weather to improve here in N.W. FL. After practicing stepping the mast and raising sail (and trapezing in the yard while the neighbors made faces), we finally get some clear weather, get the boat to the beach, get a little rushed, and wind up catching the diamond wire on the tiller crossbar while raising the mast *SNAP*...
Murrays has them on back order, but we want to go sailing. Anyone have a spare, adjustable or otherwise? This one is completely shot, or I'd try reinforcing it. Or, does anyone have the specs and a good source for raw tubing?
Thanks,
Jason R.
Nacra 5.8 Tiller Crossbar Panama City Beach FL
-
- Rank: Lubber
- Registered: Jun 17, 2012
- Last visit: Aug 14, 2012
- Posts: 8
Posted: Aug 14, 2012 - 08:09 AM
-
- Rank: Mate
- Registered: Jun 17, 2011
- Last visit: Sep 24, 2023
- Posts: 783
Posted: Aug 14, 2012 - 09:08 AM
Try starboard marine in pcb. All you need is a tube, any metal supplier can get it as well. I had my 5.8 on the water there just last week.
--
Greenville SC
Offering sails and other go fast parts for A-class catamarans
-- -
- Rank: Mate
- Registered: May 29, 2010
- Last visit: Apr 28, 2015
- Posts: 454
Posted: Aug 14, 2012 - 01:19 PM
If they don't have it try a shop that makes tuna towers for boats. They will be able to supply you.
--
Nacra 5.2
-- -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Aug 14, 2012 - 02:44 PM
Call Key Sailing in Pensacola, bet they have one.
http://www.keysailing.com/Contact.html
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.