has anyone had an issue with length of rudder pins hitting drain plug and then sticking up too high above deck lip? any issues you guys know of?
--
85 Prindle 16
"If you aint the lead dog the view never changes"
North Carolina
--
Hobie 14 rudder pins
-
- Rank: Lubber
- Registered: May 04, 2010
- Last visit: Sep 15, 2012
- Posts: 84
Posted: Mar 21, 2012 - 03:50 PM
-
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Apr 30, 2024
- Posts: 1446
Posted: Mar 22, 2012 - 11:03 AM
A Prindle rudder casting has an upper limit built in that stops the rudder pin.
About what make of cat are you talking?
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Lubber
- Registered: May 04, 2010
- Last visit: Sep 15, 2012
- Posts: 84
Posted: Mar 22, 2012 - 11:22 AM
Hobie 14
--
85 Prindle 16
"If you aint the lead dog the view never changes"
North Carolina
-- -
- Rank: Lubber
- Registered: Apr 28, 2010
- Last visit: Jul 22, 2017
- Posts: 69
Posted: Mar 22, 2012 - 12:47 PM
On the H14, the rudder pins interfere with drain plug removal and replacement. It's pretty much been that way forever. I use hairpin cotter pins on the bottom of the rudder pins so that I can slide them up out of the way when I need to remove the drain plugs.
See the discussion here: http://www.hobiecat.com/f…ewtopic.php?f=17&t=35507
--
Dave Wilson
Hobie 16, Hobie 14
Tampa, FL
-- -
- Rank: Lubber
- Registered: May 04, 2010
- Last visit: Sep 15, 2012
- Posts: 84
Posted: Mar 22, 2012 - 02:52 PM
Thanks folks - yep on the hair pins :) Guess it is the only real way to go
--
85 Prindle 16
"If you aint the lead dog the view never changes"
North Carolina
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.