--
Mark
Prindle 16 and Laguna 18DS
Ripon, WI
--
Prindle rudder question
-
- Rank: Lubber
- Registered: Jun 17, 2011
- Last visit: Jul 04, 2012
- Posts: 26
Posted: Jul 10, 2011 - 03:31 PM
Is the rudder uphaul supposed to be a pulley and spacer or just a spacer? One of mine has a pulley and spacer and the other just has a spacer. Murrays diagram just shows a spacer. Any help?
--
Mark
Prindle 16 and Laguna 18DS
Ripon, WI
-- -
- Rank: Mate
- Registered: May 09, 2009
- Last visit: May 15, 2023
- Posts: 684
Posted: Jul 10, 2011 - 04:54 PM
The original one used the pulley. Later they did away with the pulley and just put in the spacer. I believe
the other pulleys in the casting are the same and you can use one of them if you want.
--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
-- -
- Rank: Mate
- Registered: Aug 17, 2010
- Last visit: Oct 31, 2021
- Posts: 104
Posted: Jul 11, 2011 - 03:02 AM
check this post: http://www.thebeachcats.c…ictures/?g2_itemId=72614
The photos helped me get mine rigged properly. The rudders are impossible to pull up if you don't use the pulleys properly.
--
Jason Kasper
2000 Mystère 5.0XL
Lake St Francis (St Lawrence River)
Lancaster, Ontario, Canada
-- -
- Rank: Chief
- Registered: Jul 16, 2009
- Last visit: Oct 28, 2014
- Posts: 1271
Posted: Jul 11, 2011 - 07:18 AM
i used all pulleys on mine, they work great! put a ss washer between them.
Edited by coastrat on Jul 11, 2011 - 07:20 AM.
--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
--
