I recently got a pair of banged up hulls. Looking over them, its fairly apparent that they had a coat of paint or gelcoat rolled on at some point in the past. Is there any way to tell what it is? I know some paint is fairly toxic when sanding, but I need to do some repairs on them and that will require me to remove some of this outer coat.
Thanks
--
Rob
OKC
Pile of Nacra parts..
--
Identify Paint
-
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Feb 24, 2010 - 02:05 PM
-
- Rank: Chief
- Registered: Jul 16, 2009
- Last visit: Oct 28, 2014
- Posts: 1271
Posted: Feb 24, 2010 - 08:37 PM
hard to cost effectively identify paints but a charcoal filter respirator (3m 40$) and some rubber gloves and a tyvec suit(8$) will protect plenty. if your feelin frisky you could strip the paint first but be warned, it can be severe pain in arse sometimes. if i were doing a "restoration" then i would strip it first, make repairs/fairing then paint. if not then patch and go!
--
Check out "Prindle Sailors" on Facebook!
bill harris
hattiesburg, mississippi
prindle 16- "BLUE RIBBON"
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.