Where can I find a replacement clevis pin for the gooseneck on my Prindle 18? Its 1/4" x 1-1/2", which I believe is also the same for all prindles.
Thanks for any advice,
Pile of Nacra parts..
Depends on where you are located. That's a pretty common item, should be available at any marine store, or catamaran dealer. Fill out your profile (click the profile link in the main menu) and folks can help you better.
1992 Hobie 18
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures I…he Forums in the forums.
In a bind on any of the Prindle Cats and the Nacras with booms, They all use the box between the boom and attachment point on the mast. A 1 1/2" X 1/4/20 HEX head bolt works fine with a nylock nut. I would normally take one of the pins out and replace it with a bolt to not lose the box.
This list is based on users active over the last 60 minutes.