https://photos.app.goo.gl/KGg8ujNttdDJ5Vr46
--
Dave R.
Grand Haven, MI
'84 Prindle 16
--
Prindle 16 Hull concern
-
- Rank: Lubber
- Registered: May 11, 2009
- Last visit: Jul 18, 2022
- Posts: 29
Posted: Jul 05, 2022 - 08:40 PM
Is this a concern? Is hull failing (see wavy pattern on inside of hull)
https://photos.app.goo.gl/KGg8ujNttdDJ5Vr46
--
Dave R.
Grand Haven, MI
'84 Prindle 16
-- -
- Rank: Mate
- Registered: Mar 19, 2004
- Last visit: Apr 12, 2024
- Posts: 960
Posted: Jul 07, 2022 - 12:24 PM
I’m not terribly familiar with the details of the Prindle hull construction, but when Hobie hulls get wavy like that, it’s generally a sign that there is substantial delamination going on. At the very least, I would press firmly on the hull all around that area. If it’s soft, you have a problem and I would not recommend sailing the boat until the hull is repaired or replaced. Soft spots on the inside of the hull near the front crossbar can potentially lead to the bow snapping off due to bridle wire loads.
sm -
- Rank: Mate
- Registered: Sep 01, 2002
- Last visit: Apr 08, 2024
- Posts: 786
Posted: Jul 07, 2022 - 03:47 PM
When you press up against it does it feel spongie or firm?
--
John Schwartz
Ventura, CA
-- -
- Rank: Mate
- Registered: Nov 22, 2012
- Last visit: Apr 11, 2024
- Posts: 397
Posted: Jul 11, 2022 - 04:54 PM
I acquired a P-18 because it had that look while sailing. Tap on the hull with a small hammer (or hard thing) and listen for hollow sounds.
--
Scott
Prindle Fleet 2
TCDYC
Prindle 18-2 Mod "FrankenKitty"
Tornado Classic "Fast Furniture"
Prindle 19 "Mr. Wiggly"
Nacra 5.8 "De ja vu"
Nacra 5.0
Nacra 5.8
Tornadoes (Reg White)
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.