Getting the Hobie 18 ready for the summer. I wanted to put reinforcement plates on both sides front crossbar and on the shrouds but have only been able to come up with 4 of them. So I was thinking of just putting the ones on the outside front crossbar and shrouds. My thinking is when you flying a hull the outside would have most stress the inner would just be compressive load and use the other 2 for shrouds am I thinking right or missing something ?
Thanks
--
H14
H16
H18
H18
--
H18 Reinforcement Plates
-
- Rank: Lubber
- Registered: Jul 11, 2018
- Last visit: Mar 18, 2020
- Posts: 27
Posted: Feb 16, 2020 - 02:47 PM
-
- Rank: Mate
- Registered: May 08, 2013
- Last visit: Oct 02, 2023
- Posts: 508
Posted: Feb 16, 2020 - 07:59 PM
I have 2 reinforcement plates you can I have, I don’t own my 18 anymore so they are basically taking up space in my spare parts box. PM me your address and they’re yours. -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Apr 10, 2024
- Posts: 2524
Posted: Feb 17, 2020 - 07:12 AM
That’s paying it forward. They are hard to find, & sell for around $20 each, when you can find them.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Lubber
- Registered: Jul 11, 2018
- Last visit: Mar 18, 2020
- Posts: 27
Posted: Feb 17, 2020 - 12:40 PM
Pm sent Thanks
--
H14
H16
H18
H18
--
Users on-line
This list is based on users active over the last 60 minutes.