Welcome anonymous guest

Please Support
TheBeachcats.com

Hobie 18 shroud anchor plates  Bottom

  • Will the Hobie 18 shroud anchor reinforcement plate kit fit my gcat 5.7?
  • I think I answered my own question. Looks like they’re too wide to fit the deck lip. Looking to reinforce the shroud anchors on my Gcat 5.7
  • Are you sure they don't fit? I have a couple and can measure them if you are not sure.

    --
    Bill Mattson
    Prindle 19 "Gelli Bean"
    Prindle 19 "Cat's Pajamas"
    Nacra 5.2 (Will sail her a bit and let her name herself)
    --
  • The H18 anchor plares are curved (inboard/outboard) to fit in a dished out recess in the side of the hull. Unless your G cat has a similar dished out recess (I would be very surprised if it did), the H18 plate isn’t going to sit flat.

    sm
  • Thanks for the help, both of you. Considering I use to own an 18 I should have known better. I can tell from photos it’s a dead deal.
  • I have a set of these that I bought for my G-Cat 5.7 about 10 years ago. They are still in the package used because they did not fit.

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.