There are lots of photos of cats on foam blocks on the net. They appear to be about 18 inches per side , cut to confirm to hull shape. I was unable to locate them online. Are these purchased or home made? If so, where do you get the foam? Big blocks of closed cell foam are pricey through McMaster. I don't want to guess on the density at those prices. Thanks.
--
John
Nacra 5.0
CT
--
Foam blocks for hull support during storage
-
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Apr 23, 2024
- Posts: 658
Posted: Apr 17, 2016 - 06:15 AM
-
- Rank: Lubber
- Registered: Apr 28, 2014
- Last visit: Aug 18, 2023
- Posts: 91
Posted: Apr 17, 2016 - 08:20 AM
Hull Chocks
http://www.murrays.com/13-0021.html
Couldn't find many other places that sell them.
--
Steve
Nacra Inter 20
Okemos Michigan
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Apr 06, 2024
- Posts: 7088
Posted: Apr 17, 2016 - 11:25 AM
i can't recall who it was but someone on here (or the other site) makes/sells them too -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Apr 30, 2024
- Posts: 1446
Posted: Apr 19, 2016 - 10:43 PM
AZCAT makes and sells them.
Send him a PM.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Nov 02, 2004
- Last visit: Aug 07, 2023
- Posts: 626
Posted: Apr 20, 2016 - 12:13 AM
http://www.thebeachcats.c…/p13293-hull-chocks.html
--
Ron
Nacra F18
Reservoir Sailing Assn.
Brandon, Mississippi
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.