Welcome anonymous guest

Please Support
TheBeachcats.com

Nacra 5.0 Diamond Wire Turnbuckle Toggle Straps  Bottom

  • leeboweffect
    leeboweffect
    Mate
    • Rank: Mate
    • Registered: Apr 22, 2015
    • Last visit: May 21, 2023
    • Posts: 484
    Link to this post Posted: Dec 02, 2015 - 01:30 PM
    The diamond wire turnbuckles on my Nacra 5.0 are of tubular body construction. The T-bolts are 10-24 thread and the unthreaded prortions measure 3/16" diameter. The cleavis pin through holes in the toggle straps are 1/4" diameter. I think the OEM may be Hayn.

    http://www.hayn.com/marine/rigging/images_rigging/jaw_jaw_tt.gif

    I have the tubular body and T-bolts, but am in need of (2) toggle straps to put up a complete spare.

    http://www.hayn.com/marine/replacement/images_replace/toggle_stamping.gif

    I have seen some of these with 3/16" diameter through holes for the clevis pins, but they can easily be drilled out to 1/4".

    Anyone have a pair of these they would part with?

    --
    Hobie 16 (3 formerly)
    MacGregor 25 (formerly)
    Chrysler Dagger 14 (formerly)
    NACRA 5.0 (currently)
    High Point, NC
    --

No HTML tags allowed (except inside [code][/code] tags)

  • Options

Users on-line

  • 0 users

This list is based on users active over the last 60 minutes.

Search The Beachcats