Welcome anonymous guest

Please Support
TheBeachcats.com

What does the term 'two blocked' mean  Bottom

  • yelkenli1
    yelkenli1
    Mate
    • Rank: Mate
    • Registered: May 31, 2011
    • Last visit: Dec 17, 2023
    • Posts: 126
    Link to this post Posted: Sep 14, 2013 - 06:35 PM
    Interesting page:
    http://www.thebeachcats.c…-the-hobie-16-catamaran/

    But what does 'two blocked' mean?

    Thanks,

    --
    Ted
    Hobie 16
    South Carolina Lake sailing
    --
  • P.M.
    P.M.
    Mate
    • Rank: Mate
    • Registered: Jan 14, 2004
    • Last visit: Apr 21, 2024
    • Posts: 859
    Link to this post Posted: Sep 14, 2013 - 07:14 PM
    Block to block, as in sheeted all the way.

    --
    Philip
    --
  • erice
    erice
    Mate
    • Rank: Mate
    • Registered: Feb 19, 2008
    • Last visit: Aug 26, 2023
    • Posts: 671
    Link to this post Posted: Sep 14, 2013 - 09:54 PM
    to reduce the tendency of the h16 to pitchpole

    it needs maximum mast rake

    the limit on that has been pulling the boom blocks down to meet the platform blocks

    to get even more rake they started using lower profile blocks

    block to block sheeting on other boats can also be a good idea as it greatly reduces the amount of sheet needed in the mainsheet
  • MN3
    MN3
    Master Chief
    • Rank: Master Chief
    • Registered: Jun 20, 2006
    • Last visit: Apr 06, 2024
    • Posts: 7088
    Link to this post Posted: Sep 15, 2013 - 06:36 AM
    I can't find it now, but when i purchased my harken 57mm Ratchamatic Blocks (6 years ago?), they mentioned a minimum operating range (or similar name) and it was close to 12". I can't find that data on their site anymore
    Quoteblock to block sheeting on other boats can also be a good idea as it greatly reduces the amount of sheet needed in the mainsheet
  • yelkenli1
    yelkenli1
    Mate
    • Rank: Mate
    • Registered: May 31, 2011
    • Last visit: Dec 17, 2023
    • Posts: 126
    Link to this post Posted: Sep 15, 2013 - 11:12 AM
    When measuring mast rake, does the main have to be hoisted and tensioned with the down-haul? I am thinking the mast bends, but maybe not enough to care. The measurement I have seen is to use the main halyard to compare the mast top to bow with the mast top to stern. 16 inches is recommended in some places. Does anyone have other measures?

    Thanks,

    --
    Ted
    Hobie 16
    South Carolina Lake sailing
    --
  • nacra55
    nacra55
    Mate
    • Rank: Mate
    • Registered: Nov 02, 2004
    • Last visit: Aug 07, 2023
    • Posts: 626
    Link to this post Posted: Sep 15, 2013 - 12:20 PM
    On a H16, no, but the jib would have to be up and the rig tensioned.

    --
    Ron
    Nacra F18
    Reservoir Sailing Assn.
    Brandon, Mississippi
    --

No HTML tags allowed (except inside [code][/code] tags)

  • Options

Users on-line

This list is based on users active over the last 60 minutes.

Search The Beachcats