Welcome anonymous guest

Please Support
TheBeachcats.com

Main Halyard for Nacra 17  Bottom

  • Ok, I need to replace my Halyard can anyone recommend the correct diameter and type of line to use?

    2000 yr Nacra 17 Interfusion

    Thank you

    --
    Will
    Indian Shores, FL
    Newbie but catching on fast.
    NACRA 17
    --
  • Ideally, 3/16" of "quality" double braid to minimize stretch. Low stretch single braid will work also.

    --
    Philip
    --
  • I may name my boat the Interfusion.

    --
    Rob
    OKC
    Pile of Nacra parts..
    --
  • Like Philip said, decent quality 3/16" polyester double braid is fine. I use sta-set (with something much higher quality for the spin halyard.)

    Once the main is hoisted, the halyard bears no load, so no reason to go overboard on it.

    --
    Rob
    OKC
    Pile of Nacra parts..
    --
  • Thanks purchased the following for $20 will rig this weekend see how it does?

    3/16" (5mm) x 75 feet of Double Braid Polyester (Dacron) Line

    Uses: Mainsheets, Halyards, Jibsheets, Control Lines, Tie-down rope, Utility Cord

    Color: Blue with Gold Fleck

    Tensile: 1,400 lbs.

    here is link if anyone else is interested
    http://www.ebay.com/itm/161004214276?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649



    Edited by 27fountain on Apr 24, 2013 - 08:55 PM.

    --
    Will
    Indian Shores, FL
    Newbie but catching on fast.
    NACRA 17
    --

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.