Welcome anonymous guest

Please Support
TheBeachcats.com

Furling Jib for H16  Bottom

  • Looking for a furling jib for H16, doing the Everglades Challenge in a few months and they require a furlable jib.

    Anyone looking to get rid of one or know someone who does?

    Cheers!
    -Matt
  • very common on the h14, came as standard on the h18

    but i've never seen 1 on an h16

    it's a BIG fully battened jib and the h16 basically is very difficult to sail without a jib

    so you may not find a h16 furling jib in time and be forced to make something else fit
  • Hobie sells a kit, and several sailmakers will make one.

    --
    Jeff
    Houston TX
    1986 Hobie 18 Sail# 13031
    --
  • Here is a photo of an aftermarket H16 furling jib on top of a standard H16 jib. As you can see, there is a decent size loss in square footage. It's been 8 years or so since I owned it, but I did love the convience in having a furling jib on my H16 (and later on my P18 and P19)

    http://coypaeltz.com/jmhoying/jibs.jpg

    Jack
    Fort Loramie, Ohio
  • I agree the furling jib is the best thing I have added to my P18

    --
    Dustin Finlinson • Magna, UT
    Member: Utah Sailing Association
    1982 Prindle 18
    1986 Hobie 17
    1982 Prindle 16
    1980 Prindle 16(mostly)
    1976 Prindle 16(mostly)

    Check out "Prindle Sailors" on Facebook.
    --
  • Jmhoying ...there is a decent size loss in square footage.

    Did you use a barber hauler offwind to help shape the smaller jib?



    Edited by klozhald on Nov 29, 2012 - 09:49 AM.

    --
    Sheet In!
    Bob
    _/)_____/)_/)____/)____/)_____/)/)__________/)__
    Prindle 18-2 #244 "Wakizashi"
    Prindle 16 #3690 "Pegasus" Sold (sigh)
    AZ Multihull Fleet 42 member
    (Way) Past Commodore of Prindle Fleet 14
    Arizona, USA
    --

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.