Fix these?
edited by: sailinagin, Sep 20, 2010 - 06:08 PM
--
David
Memphis, TN
'84 Hobie 18
--
Minor hull repair
-
- Rank: Mate
- Registered: Jun 14, 2010
- Last visit: Aug 18, 2014
- Posts: 242
Posted: Sep 20, 2010 - 06:59 PM
Will this....
Fix these?
edited by: sailinagin, Sep 20, 2010 - 06:08 PM
--
David
Memphis, TN
'84 Hobie 18
-- -
- Rank: Mate
- Registered: May 31, 2010
- Last visit: Jun 21, 2017
- Posts: 280
Posted: Sep 20, 2010 - 07:05 PM
Your photo's are messed up.
--
Tyler holmes
Panama city, FL
Boat whore
-- -
- Rank: Mate
- Registered: Jun 14, 2010
- Last visit: Aug 18, 2014
- Posts: 242
Posted: Sep 20, 2010 - 07:06 PM
workin on it gimme a friggin break!
--
David
Memphis, TN
'84 Hobie 18
-- -
- Rank: Mate
- Registered: May 31, 2010
- Last visit: Jun 21, 2017
- Posts: 280
Posted: Sep 20, 2010 - 07:18 PM
Jeeeeeeze, i don't think it will fix the bottom one, but the other one's should be fine.
--
Tyler holmes
Panama city, FL
Boat whore
-- -
- Rank: Mate
- Registered: Apr 29, 2009
- Last visit: Apr 25, 2016
- Posts: 191
Posted: Sep 20, 2010 - 07:35 PM
Looks like you will need some filler that gel coat paste will not really fill holes and gouges that deep. The damage is not bad and should be easy to fix but matching that yellow sounds tricky. You could buy this to fill them http://www.westmarine.com…Num=10296&classNum=10297
Then buy some gelcoat and yellow pigment use a Preval Sprayer and test it on some cardboard till you get the color close enough.
edited by: fa1321, Sep 20, 2010 - 06:43 PM -
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Posted: Sep 20, 2010 - 08:44 PM
The gel coat repair kit will help you match your gelcoat color. Those won't repair the dings though you need a repair kit like Floyd pointed out. The West system repair packs are pretty easy to use and will work well for that. Probably your best bet for a permanent fix. Just follow the instructions in the pack or check out thier web site.
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Apr 10, 2024
- Posts: 2524
Posted: Sep 21, 2010 - 06:05 PM
That bottom phot shows exposed glass mat. You should pull off the bits of broken gel coat,& use a dremel or similiar tool to route out the cracks, then saturate the mat with resin. Fill to around 1/16" below the surrounding gel coat, then when you figure out the correct mix to color match you can fill the remaining 1/16" & buff smooth.
edited by: Edchris177, Sep 21, 2010 - 05:06 PM
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Apr 01, 2024
- Posts: 3428
Posted: Sep 21, 2010 - 06:10 PM
Ouch!
You been playin bumper boats?
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Mate
- Registered: Jun 14, 2010
- Last visit: Aug 18, 2014
- Posts: 242
Posted: Sep 21, 2010 - 06:40 PM
Contrary to popular belief I am a better helmsman than that. These came with the deal I got on the boat!
--
David
Memphis, TN
'84 Hobie 18
--
