Pull on dolphin striker?
-
- Rank: Lubber
- Registered: Mar 22, 2010
- Last visit: Aug 25, 2011
- Posts: 28
Posted: Jul 12, 2010 - 03:23 PM
Should I be connecting to the dolphin striker of my Nacra 5.2 to pull the boat up a boat ramp with rollers, or will this damage the boat? Is there a better location? -
- Rank: Mate
- Registered: May 30, 2007
- Last visit: Jun 28, 2011
- Posts: 101
Posted: Jul 12, 2010 - 03:46 PM
Id put a line between the bridal anchors and pull from there rather than the dolphin striker. -
- Rank: Chief
- Registered: Jun 24, 2009
- Last visit: Jun 15, 2023
- Posts: 1555
Posted: Jul 12, 2010 - 03:50 PM
Front beam! Try not to pull on the dolphinstriker, it's really not meant to be pulled laterally, same goes for the bridal anchors. You should have a space at each side of the front beam between the hull and tramp to attach a rope to.
Regards,
Dave
--
Dave Bonin
1981 Nacra 5.2 "Lucile"
1986 Nacra 5.7 "Belle"
Winnipeg, Manitoba, Canada
-- -
- Rank: Mate
- Registered: Dec 21, 2009
- Last visit: Apr 16, 2013
- Posts: 127
Posted: Jul 12, 2010 - 04:21 PM
Feed a line thru the front beam, tie it in a loop and use for towing or pulling.
--
Gray Amick
Chapin, SC
'77 NACRA 5.2
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Apr 06, 2024
- Posts: 7088
Posted: Jul 12, 2010 - 04:21 PM
i agree 100% with Dave.
-
- Rank: Lubber
- Registered: Mar 22, 2010
- Last visit: Aug 25, 2011
- Posts: 28
Posted: Jul 12, 2010 - 05:35 PM
Thanks, will do.
