my bearing for mast mount is old and starting to crumble too much sunlight,1981 hull i understand that you must buy whole assembly so that the new bearings will install old bearings not available? How do I know if Mine has been upgraded is there something about the rivets 2 or 4 on the new one. I have two rivets holding mast mount to crossbar and a machine screw holding bearing in place..
Thanks for any insight
--
Ted
Hobie 21SE Feral Cat
Upstate NY lake sailing
--
h 18 mast mount old or new
-
- Rank: Lubber
- Registered: Mar 14, 2010
- Last visit: Sep 18, 2019
- Posts: 79
Posted: May 19, 2010 - 09:20 PM
-
- Rank: Mate
- Registered: May 09, 2009
- Last visit: May 15, 2023
- Posts: 684
Posted: May 19, 2010 - 10:34 PM
Ted,
You can buy just the bearing for the old style mount. If you
change to the new four rivet mount, you must buy the kit with the new dolphin striker rod. Did you sail your boat yet?
--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
-- -
- Rank: Lubber
- Registered: Mar 14, 2010
- Last visit: Sep 18, 2019
- Posts: 79
Posted: May 22, 2010 - 09:23 AM
Pete no not yet am going to Glimmerglass lake staying at the campsite on lake. It is by cooperstown for the weekend memorial day and am bringing the boat so we will sail then. Just got to rewire the trailer this week and I am ready....
--
Ted
Hobie 21SE Feral Cat
Upstate NY lake sailing
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.