Welcome anonymous guest

Please Support
TheBeachcats.com

6:1 blocks  Bottom

  • I recently purchased 6:1 Harken blocks to replace my Seaway 4:1, I now find that the Harken ratchet block does not fit my traveler, pivot pin too thick, any suggestions?

    --
    TurboHobo
    H14T
    H16
    P18
    G-Cat 5.0
    P16
    --
  • my lower block came with a shackle so i put the pin in the traveler through the shackle. ive heard of other people grinding the pivot pin down so it fits into the traveler.
  • The blocks I purchases did come with a shackle, I really prefer having a quick release pin for connecting the ratchet block to the traveler car, I will have to see if I can get the pivot pin milled smaller.

    http://www.thebeachcats.com/index.php?module=pictures&g2_itemId=63053

    --
    TurboHobo
    H14T
    H16
    P18
    G-Cat 5.0
    P16
    --
  • im saying keep the shackle on the block and just run the quick release pin through the travler and the shackle
  • 10/4

    --
    TurboHobo
    H14T
    H16
    P18
    G-Cat 5.0
    P16
    --

This list is based on users active over the last 60 minutes.