I need to redo the rigging on my p16 rudders. Any one
know the size of the cordage and the lengths of each
piece.
--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
--
Prindle 16 rudder rigging lines
-
- Rank: Mate
- Registered: May 09, 2009
- Last visit: May 15, 2023
- Posts: 684
Posted: Jul 12, 2009 - 08:45 PM
-
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Jul 12, 2009 - 09:46 PM
4' each, 1/4" -
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
Posted: Jul 13, 2009 - 02:34 AM
Since mine came from Pete I recommend you listen to him. Just use good quality line you don't want to skimp here.
I did make one adjustment I like you might consider while you are redoing it though. I rigged my up line with the black rope I got from Pete when I bought a new rudder casting from him. Then I rigged the lock down line with some good white rope. Not necessary but but easy to tell at a glance which one you need to pull.
edited by: Quarath, Jul 13, 2009 - 12:35 AM
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
-- -
- Rank: Mate
- Registered: May 09, 2009
- Last visit: May 15, 2023
- Posts: 684
Posted: Jul 13, 2009 - 06:00 AM
Thanks for the info. Mine uses a round ball for one line,
and an aluminum t-handle for the other. Hard to mix them up.
--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
-- -
- Rank: Mate
- Registered: May 09, 2009
- Last visit: May 15, 2023
- Posts: 684
Posted: Jul 13, 2009 - 08:59 PM
Went to West marine today and picked up some 1/4"
line. All their line is 25% off by the way. The
1/4" is way to large for the rudders. What is left
from the old stuff is smaller than 1/4 but larger than
the 3/16 I also bought. I think that it must be swelled
3/16.
--
Pete Knapp
Schodack landing,NY
Goodall Viper,AHPC Viper,Nacra I20
-- -
- Rank: Mate
- Registered: Jul 06, 2008
- Last visit: Jul 19, 2018
- Posts: 986
Posted: Jul 13, 2009 - 09:48 PM
Mine has the ball and and T as well but if I'm telling one of my kids or wife to pull one or the other it's easier to just say pull the black or white one.
--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
-- -
- Rank: Mate
- Registered: Mar 12, 2003
- Last visit: Feb 19, 2021
- Posts: 879
Posted: Jul 13, 2009 - 11:49 PM
I use Murrays 39-0452BK, dacron spun braid 1/4" black, 4' for each line. Other manufacturers 1/4" can be larger. Pete Big Bear Lake, Ca
