Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Curved deck hatches

[quote=Dogboy]A few years ago, I installed access ports on my H14 (very curved deck). After cutting the main hole and drilling the mounting screw holes, I installed the screws very gently. Then I masked around the port flange and filled the gap using West Six-10 thickened epoxy adhesive. After the epoxy gelled, I removed the masking and let it fully cure. This provided a solid surface to screw down the flange against. The main thing is that you don’t want to flex the flange, otherwise it will distort and the cover will never screw in correctly or easily. sm[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.