Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Gcat 5.7

[quote=MN3]I doubt it was from the factory but not certain. Hans contracted out a lot of the construction of g-cats and the quality control was all over the place. The boats SHOULD have been originally been built with a mold that had gelcoat sprayed in first, then foams, then glass / epoxy (not sure about g-cats but I know that not all boats have foam). Deck lids were a separate mold and attached with some type of marine bonding [del]glue[/del] shmutz. i know Hans and other g-cat owners have used strips of steel on the keels to prevent wear and I would completely believe someone could have thought it was a good idea to add sacrificial epoxy or kevlar or "other" during a bottom job to avoid wear. Is summary - who knows, and it doesn't really matter. Just do a good repair and get in the pond[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.