[quote=charlescarlis]Oh man, you've definitely got something tearing on that thing. Check where your luff track goes from plastic to aluminum; the two pieces should be smooth, especially the top, aluminum piece. I'm betting that where the plastic transitions to aluminum, the aluminum has either a burr on it or the aluminum section was installed backwards so that the flared out part of the track is at the tip of the mast instead of next to the plastic piece. The flare in the aluminum track is supposed to be against the plastic to stop this very thing from happening. got pictures of the comp tip?[/quote]
No HTML tags allowed (except inside [code][/code] tags)