[quote=Edchris177]The assembly manual says to install the end caps BEFORE tightening the beam straps, precisely to prevent the noted problem.
Step 7/8 in the assembly manual, where you install the straps & chips, “ Do not completel tighten the bolts at this stage.”
Step 12/13 instruct for the front trap cords - THEN install beam caps & tighten.
You can’t really shave the OEM caps to a smaller diameter, that would remove most of the rim that keeps them in place.<!-- editby --><em>Edited by Edchris177 on Sep 04, 2022 - 02:40 PM.</em><!-- end editby --> [/quote]
No HTML tags allowed (except inside [code][/code] tags)