Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Cat Trax

[quote=Edchris177][quote=kevin624]Does anyone know where just the wheel/hub from a Cat Trax can be sourced from? The balloon tires are cheap, Nanco N800's which can be had readily for under $50/tire. The rest of the parts are trivial -- 2" aluminum tube 96" long, some Delrin rod cut to length for bearings, washers and cotter pins and such. I have searched high and low and cannot find the wheels used on a proper Cat Trax. It could be that they are proprietary. Could use a 8" x 9" steel or aluminum wheel which are cheap and available, but then you've got to deal with a 4 bolt 4" hub and it goes downhill from there, too complex and heavy for the beach. The wheel hub is the key to success in fabricating these cheaply at home.[/quote] I said as much when I first made this album, [url]https://www.thebeachcats.com/pictures?g2_itemId=119871&g2_GALLERYSID=c0ac25cc25fa3af62e60d4f0eef418ca[/url] After much thought, I just bought a used set. There is simply no way to obtain all the parts & save any reasonable amount. IF I only dealt with a paved ramp, there are other wheels, but as you mentioned, the hubs, & their associated bearings make an inferior product. With some patience you can find them in good shape for around $300. It’s just not worth getting an inferior product, for the same $[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.