Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Shroud Adjuster missing from Forestay?

[quote=jgregs]I am trying to set up a used Mystere 6.0. I am new so I'm not using the spinnaker pole and instead was going to connect the forestay directly to the bridle wires/bridle plate. However, there isn't a stay adjuster so I'm confused on how it all comes together. (This images is the same setup as mine [url=https://static.shoplightspeed.com/shops/609908/files/003868937/h1802b1.jpg]https://static.shoplightspeed.com/shops/609908/files/003868937/h1802b1.jpg[/url]) 1) I don't have the top section of wire above the swivel. Do I need to have this remade? 2) With out a stay adjuster, is it the pulley + jib halyard wire that will adjust the rig tension? 3) Where does everything attach and secure and in what order? My initial thought, from top to bottom, was forestay > furler > bridle plate > bridle wires. But where does the tack of the jib secure? In videos I've seen this is attached to the lowest hole on the stay adjuster.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.